
Bloomingdale Cabinet Refacing
Cabinet Refacing in Bloomingdale, FL
Cabinet refacing in Bloomingdale replaces doors, drawer fronts, and box skins with free estimates and matched finishes.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Bloomingdale and nearby communities.
What's the difference between refacing a kitchen and gutting it? Refacing keeps your existing cabinet boxes in place and rebuilds the visible surfaces: new veneer or laminate skins, new doors, new drawer fronts, fresh hardware. The boxes that are already bolted to your studs stay put.
Bloomingdale Cabinet Refacing works on a lot of 1980s and 90s oak boxes around here. Most are still structurally sound under a dated finish, which makes them good refacing candidates instead of demo candidates.
What's included
What's included
Typically included
- Box inspection for moisture, warping, and square corners before any material gets ordered
- Veneer or laminate skins applied to all exposed box surfaces
- New doors and drawer fronts in your chosen style
- Hardware mounting, including hinges and pulls
Optional
- Soft-close hinge and slide upgrades
- Crown molding added along cabinet tops
- Matching end panels for exposed cabinet sides
Customer prep
- Clear counters and empty cabinet contents before install day
- Confirm final door style and finish at the material selection step
Want a clearer scope?
Get a Free EstimateHow it works
Our process
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and methods for Cabinet Refacing
Material choice drives both cost and how the finish holds up in Florida's humidity.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. It holds up well on boxes that stay humid near the kitchen sink.

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes, common on older Bloomingdale oak kitchens we're asked to update.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, which matters once central AC cycles dry the house out and back in.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What does cabinet refacing cost in Bloomingdale?
Cost tracks mostly with cabinet count, door style, and whether you add hardware upgrades along the way. Here's the rough range: These are ballparks, not a quote. Contact us for a free in-home estimate.
| Project type | Typical range | What’s included |
|---|---|---|
| Doors-only refresh | $2,500–$6,000 | new door and drawer fronts on sound boxes. |
| Standard full refacing | $6,000–$12,000 | new skins, doors, drawer fronts, and hardware. |
| Full refacing with upgrades | $12,000–$18,000 | premium wood veneer, soft-close hardware, and molding. |
| Add-on services | $300–$1,500 | island matching or crown molding bundled into a larger job. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing
Check with Hillsborough County before scheduling if your project touches electrical or plumbing.
| Typically needs a permit | Often no permit |
|---|---|
| Swapping a knob or pull here and there is low-risk | Veneer adhesive needs even pressure and a clean substrate |
| Single-door paint touch-ups are forgiving if you go slow | or it bubbles within a year |
| Full veneer bonding across a kitchen's worth of boxes is not a weekend skill | Door alignment across a full kitchen needs jigs and hinge-boring experience |
| — | A pro catches box damage before it becomes a bigger problem mid-install |
Need help with permits?
Get a Free EstimateBefore & after
Before and after Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
Is refacing cheaper than replacing cabinets?
Usually, yes. Refacing reuses your existing boxes, which are often the most expensive part of a kitchen. You're paying for new surfaces and doors, not new carpentry and installation from scratch.
What's the difference between refacing and painting cabinets?
Refacing replaces doors, drawer fronts, and exposed box surfaces with new material. Painting keeps the existing doors and surfaces and just changes the finish color. Refacing handles worn or outdated surfaces that paint can't fix.
How do I know if my cabinet boxes are solid enough to reface?
A technician checks for water damage, warping, and loose joints during the box assessment step. Solid wood or plywood boxes in decent shape are good candidates. Swollen particleboard near sinks sometimes needs box repair first.
How long does cabinet refacing take?
Most full kitchens run one to two weeks from measure to final walkthrough, including material lead time.
Do I need a permit for cabinet refacing?
Rarely. It's cosmetic work on existing boxes. Permits only come up if electrical or plumbing gets moved.
Next step
Get a Cabinet Refacing estimate in Bloomingdale
Call (863) 869-2358 or request a free estimate online. Home · Contact · see our Kitchen Cabinet Refacing page too.
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Bloomingdale, FL with matched veneer finishes, new doors, and soft-close hardware. Free estimates, no gutting your kitchen.

Bathroom Vanity Refacing
Bathroom vanity refacing in Bloomingdale, FL with moisture-resistant finishes and new doors. Fixes swollen boxes and peeling laminate. Free estimates.

Cabinet Door Replacement
Cabinet door replacement in Bloomingdale with matched styles, soft-close hinges, and free estimates for solid boxes that just need new fronts.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.